CGDI BMW Update Log

Here is the CGDI BMW update history log,you can check all CGDI BMW  update information here.

 CGDI BMW Update 01.10.2019

1.CGDI BMW can program the following G F E models :
1)E60(E60\E61\E63\E64
2) E65(E65\E66\E67\E68)
3)E7O(E7O\E71\E72)
4) E89(E81\E82\84\ E87\E88\E90\E91\E92\E93)
5) R56(R55,R56,R57,R58,R59,R60,R61)
6) F001(F001,F002,F003,F004,F007,RRO4,RRO5, RRO6
7) F010(F005,F5006,F010,F011,F012,F013,F018)
8) F020(F020,F021,F022,FO23,F030,F031,F032,F033.F034,F035,F036,F080,F082,F083,F087,F088)
9) F025(F015,F016,F025,F026,F085,F086)
10) FO56(F039,F045,F046,F047,F048,F049,F052, F054,FO55,F056,F057,F060)
11) G070(G070,G071)
12) I001(1001,1012,1015)
13) KO01(K010,K018,K019,KO21,KO22,K023,K032,K033,K034,KO35,K045,K046,K047,K048,K049
K050,K051,KO52,K053,KO54,K061,K067,K069,K080,K081,K082,K083,K084)
14) KEO1(K017)
15) M013(M013)
16) KSO1(K002,K0O03,K008,K009,K060
17) S15A(F090,F097,F098,G001,G002,G011,G012,G013,G030,G031,G032,RR11,RR12,RR31)
18) S15c(G008,G038)

2.Workable modules

Support the modules communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc.

The unsupported modules: the modules that need Fiber Optic CAN bus and the other bus lines, such as: multimedia display, radio, car information computer etc.

 3.Capabilities

Program the BMW car modules.

Can reprogram the broken module if the module can be communicated.

Automatically read and display the car model and VIN number.

 

4.CGDI BMW can code for the following BMW G /F /E models:
1) E60(E60\E61\E63\E64
2) E65(E65\E66\E67\E68)
3) E7O(E7O\E71\E72)
4) E89(E81\E82\84\ E87\E88\E90\E91\E92\E93)
5) R56(R55,R56,R57,R58,R59,R60,R61)
6) F001(F001,F002,F003,F004,F007,RRO4,RRO5, RRO6
7) F010(F005,F5006,F010,F011,F012,F013,F018)
8) F020(F020,F021,F022,FO23,F030,F031,F032,F033,F034,F035,F036,F080,F082,F083,F087,F088)
9) F025(F015,F016,F025,F026,F085,F086)
10) FO56(F039,F045,F046,F047,F048,F049,F052, F054,FO55,F056,F057,F060)
11) G070(G070,G071)
12) I001(1001,1012,1015)
13) KO01(K010,K018,K019,KO21,KO22,K023,K032,K033,K034,KO35,K045,K046,K047,K048,K049,K050,K051,KO52,K053,KO54,K061,K067,K069K080,K081,K082,K083,K084)
14) KEO1(K017)
15) M013(M013)
16) KSO1(K002,K0O03,K008,K009,K060
17) S15A(F090,F097,F098,G001,G002,G011,G012,G013,G030,G031,G032,RR11,RR12,RR31)
18) S15c(G008,G038)

5.Testable modules

Support the modules communicating with K-line and Can bus line , including gateway, airbag, engine, transmission, CAS, dashboard, air conditioning, light module, Footwell Module (FRM) etc. The specific module will be known according to the car’s configuration information.

 6.Capabilities

1) Backup & coding, restore coding, coding etc.

2) To set code for the module after the car module is programmed or replaced.

3) Automatic read and display the car model and VIN number.

CG-DI V2.4.0

(2018.12.13)

1. New: BMW data modification function: support CAS3/3+ data modification VIN, ISN, support CAS4/4+ data VIN, ISN modification, support N20 data VIN, ISN modification.

2. BMW F/G series programming: support automatic code setting after programming; repair some problems of instrument programming failure; repair some EPS programming failure problems; repair ECU list display error.

3. CAS mileage reset: fix the problem of partial version programming failure.

4. Firmware upgrade: Improve USB communication performance.

——————————————————————————————————————————————————————————-

CG-DI V2.3.0

(2018.11.21)

1. New: Porsche 987, 911 OBD key learning

2. New: Maserati Levante 95320, Geberit 95160, President 95160 Instrument OBD adjustment

3. FEM/BDC key matching: Optimize the pre-processing process, increase backup FAFP, restore FAFP function, calculate ECU data, reset starter lock, calculate ELV data function, and add repair remote control function description.

4. BMW F Series Programming: Supports instrument programming greater than 10MB. The modules to be programmed are displayed in red font, and the code modules are displayed in blue font.

5. BMW F system code: Optimize the modules to be programmed in red font.

6. 95128/95256 adds 95540 chip read and write.

——————————————————————————————————————————————————————————-

CG-DI V2.2.5  

(2018.09.06)

1. Fix some win7 users fail to open the software.

2. Fix a problem that a version has failed to erase the mileage.

3. OBD key matching: increase support for 9389115, 9395657 two versions of CAS3++

4. BMW ISN: Add 9389115, 9389116, 9395656, 9395657 four versions of CAS read, write, read and write ISN

5. Increase CAS mileage reset function, support CAS1-CAS3+, a small number of versions of CAS are not supported, if you do not support you can try to upgrade to a supported version.

The following are the supported CAS hardware numbers:

CAS3:6943770,6943774,6943776,6943777,6943779,6943780,6943783,6943784,6943788,6943790,6943798,6943805,6943806,6943816,6943817,6943823,6943824,6943832,6965769,6985696,6985697,9147170,9147171,9147184,9147193,9147194,9147197,9147198,9147199,9147200,9147201,9147202,9147207,9147208,9147209,9147210,9147211,9147218,9147219,9147228,9147229,9230591,9257219,9257220,9273192,9273193,9283153,9283154,9314256,9321069

CAS2:4113748,4113918,4113919,4114222,4114373,4116023,4116658,4117916,4119466,4121910,4125233

4125709,4142256,6922390,6927930,6931395,6943745,6960978,6961659

——————————————————————————————————————————————————————————-

CG-DI V2.2.3  

(2018.08.03)

1.Fix the problem that the codding ICM module is invalid

——————————————————————————————————————————————————————————-

CG-DI V2.2.3  

(2018.07.19)

1.BMW ISN:Add DME wiring diagrams for D62M57A0, ME9N62_2, MEV9N46, MEV17_2N, MEVD176K, MEVD1724, MEVD1725, MS450DS0, MV1722, MVD1722

2.FEM/BDC key matching:Add “write EEPROM” function,Optimize read and write processes

3.Fix CAS4 key matching to determine the CAS type is incorrect。

——————————————————————————————————————————————————————————-

CG-DI V2.2.2

(2018.06.27)

1.BMW OBD Key Match:Add “Add Key”function。

2.FEM/BDC Key Match:

(1)Added 95128/95256 read and write capabilities (need to use a matching adapter)

(2)Fix the problem of failure to replace FEM/BDC write data

(3)Added new SWFL support (ISTA-64)

3.BMW ISN:

(1)Added F series to read DME ISN type:MEVD172Y MEVD1724 MEVD1725 N63TU_R0 N63TU_L0 S63TU_R0 S63TU_L0

(2)Added E series to read DME ISN type:ME17N45(N45 Tricore) MEV17N46(N46 Tricore) MED17_2 MED17_2N(N14 Tricore) MEV17_2 MEV17_2N(N12 Tricore) MV1722(N16 Tricore) MVD1722(N18 Tricore) MEVD174K(N20, Tricore) MEVD176K(N55 Tricore) MVD1727(N18 Mini Tricore) MEVD17KW(Tricore) MSV70 MEV9N46L ME9N62 MEV9N46 N62_TUE N62_TUE2 MS450DS0 ME9N62_2 ME9N45 ME9E65_6 N73_L0 N73_R0 D7xN47xx D7xN57xx D60PSA0 MSS60 DDE604 DDE626 DDE603 DDE509 DDE606 DDE608 D50M57A0 DDE506 D50M57C0 D50M57E0