CG FC200/ AT200 Support Bosch MG1 MD1 ECU Reading and Writing
Both CG FC200 and AT200 BMW support Bosch MG1 MD1 ECU.
FC200 is the update version of AT200. It is dedicated to the new generation ECU where it covers 99% of the Bosch brand and in development on other ECU brands.
AT200 BMW supported MG1 MD1 ECU List:
Check AT200 Support ECU List
How to use AT200 to clone BMW ECU MG1 and MD1?
FC200 supported MG1 MD1 ECU List:
Audi
Audi BOSCH MD1CP004 SPC5777
Audi BOSCH MD1CP004_ TC298TP
Audi BOSCH MD1CS004 TC298TP
Audi BOSCH MG1CS001 SPC5777
Audi BOSCH MG1CS002 SPC5777
Audi BOSCH MG1CS002_ TC298TP
BMW:
BMW BOSCH MG1CS003 SPC5777
BMW BOSCH MG1CS024 TC298TP
BMW BOSCH MG1CS201 TC298TP
Bentley:
Bentley BOSCH MG1CS002_ TC298TP
Citroen:
Citroen BOSCH MG1CS042 TC298TP
DS/ Dacia:
DS BOSCH MG1CS042 TC298TP
Dacia BOSCH MD1CS006 TC298TP
FIAT:
FIAT BOSCH MD1CS006 TC298TP
Ford:
Ford BOSCH MD1CS005 TC298TP
Mercedes-Benz:
Mercedes BOSCH MD1CS006 TC298TP
Nissan:
Nissan BOSCH MD1CS006 TC298TP
Peugeot:
Peugeot BOSCH MG1CS042 TC298TP
Porsche:
Porsche BOSCH MG1CS002_ TC298TP
Renault:
Renault BOSCH MD1CS006 TC298TP
Skoda:
Skoda BOSCH MG1CS001 SPC5777
VW:
Volkswagen(VW) BOSCH MD1CP004 SPC5777
Volkswagen(VW) BOSCH MD1CP004_ TC298TP
Volkswagen(VW) BOSCH MD1CS004 TC298TP
Volkswagen(VW) BOSCH MG1CS001 SPC5777
Keep updating…
How to read/write Bosch MG1 MD1 by FC200?
Run CG FC200 software
Select the car brand
Input the Bosch number to inquire the ECU model
Select the ECU model searched out
Enter platform interface
Follow the wiring diagram to connect CG FC200 and DME
Identify DME>> read ISN>> Read EEPROM>>Write EEPROM