Here is the comparison about two hot-sale ECU programmers on the market: CG FC200 and PCMtuner Magic Car Tool. Item CG FC200 PCMTuner IMG Software Language English, French, Spanish, Polish, Turkish, Chinese English and Russian Dongle No USB Smart Dongle Offline/online It should work online and with 12v power supply. Work offline, VR
Can CG FC200 clone VW BOSCH EDC17CP20 ECU? The answer is Yes. It can be found in the FC200 software. It’s easy to operate. Run CG FC200 software Firstly, update the authorization Then, select the car brand, model and ECU correctly Next, enter ‘Platform’ page Connect the VW ECU to FC200 by the professional wiring harness properly according
Does CG FC200 support checksum? This is a question that many customers often ask before purchasing equipment. Actually, FC200 has its own data verification, and it is automatically calculated by software. Checksum can only be used in the PFlash data area. As long as we have modified the PFlash data area, including but not limited to: fault code shielding, anti-theft
Have one CG FC200. Use it to read password and backup data on Fiat Doblo EDC17C49 via bench mode successfully. This is Doblo BOSCH ECU. I have connected cg fc200 ecu programmer with the Doblo EDC17C49 ECU and computer. Then open CG FC200 software to operate. Select the car info as below. Car brand: Fiat Car model: Doblo (263)
Problem: I just received one new CG FC200 ECU programmer last week. After installing the FC200 software, I started to run the software, but I encountered three errors. Error 1: e126: Failed to open the device, please check the device connection Error 2: Failed to connect to the server. Check the network or try again later Error
Many customers ask what functions they can perform by reading and writing DFLASH or PFlash with CG FC200 ECU programmer. I’ve put together a list of common questions and answered them in detail. 1.Modify VIN The data area used is DFlash. 2.Modify ISN Only the BMW has the ISN, which is used for communication authentication. The data
Is it possible to use CG FC200 ECU programmer to read DFLASH and PFLASH on Renault Twingo (II) BOSCH ME17.9.20 TC1782? The answer is YES. This ECU model is supported. Check the CG FC200 ECU list for Renault as below. Car Make Model Engine- Gearbox ECU Renault Captur (J5) 1500 dCi — 89 BOSCH EDC17C42 TC1767
The CG FC200 currently supports the cloning of 6HP ECUs in BMW F-series (F01, F02 and F03). Here takes BMW CONTINENTAL 6HP TC1766 as an example. Update the authorization in FC200 software before use Determine the ECU type according to the vehicle model, and select the correct model, otherwise it will not operate normally. Path:
CG FC200 programmer test report: clone VW Bosch ME17.5.22 TC1724 successfully. The test: Open FC200 software Click ‘license’ to view the authorization list Click ‘Update authorization’ to update license Follow the wiring diagram in the CG FC200 software to connect FC200 and VW ECU, then connect to the laptop Select ‘VW’ Input the Bosch model in the search
